Category Archives: PCB Design

LiPo Booster

2014-05-14 20.33.36

LiPo Booster is a breadboard-friendly boost converter board based on the TPS61230 IC from Texus Instrument. It has an output voltage of 5V, and is designed to be used with a single cell LiPo battery. 

For normal and half size breadboards, the LiPo Booster can be plugged into the power rails without blocking the vertical 5-pin strips. It can also be used with a tiny breadboard or breadboard of any sizes as shown below.

2014-05-14 20.33.07

The Eagle design files and BOM can be found here: